GE Datex-Ohmeda Care Plus 4000 Incubator
The GE Ohmeda Care Plus 4000 incubator stands out as a high-quality medical device tailored specifically for neonatal care. Designed with an emphasis on ensuring a controlled and consistent environment for newborns, it is equipped with advanced features that cater to both the infants’ needs and the convenience of healthcare providers.
Main Features:
- Advanced Thermoregulation: At the core of the GE Ohmeda Care Plus 4000 is an integrated microprocessor-based controller. This ensures that the temperature within the incubator is always optimal, creating a comfortable and safe environment for the neonate.
- Active Double Wall Construction (Optional): This feature is crucial in ensuring the consistency of the temperature inside the incubator. By actively controlling the temperature of both the inner and outer walls, it eliminates cold spots and ensures a uniformly warm environment.
- Ease of Access: Designed with healthcare providers in mind, the incubator offers easy access to the infant, making medical interventions simpler and more efficient.
Additional Features:
-
- Dovetail Rail System: This is a robust mounting solution that allows for the attachment of additional medical equipment or accessories.
- Standard Humidifier: Ensures that the air inside the incubator maintains an ideal humidity level. This is vital for the comfort and health of the infant. Healthcare providers can also vary the humidity according to specific needs.
- Care Plus 3000 Tilt: This variant of the incubator comes with a three-position tilt function. This feature enables healthcare providers to adjust the bed to 0º, 3º, or 6º positions at either end. Such tilting can be beneficial for certain medical conditions and interventions.
- Care Plus 4000 Continuous Tilt: Building on the above feature, the Care Plus 4000 model allows for a smooth and unlimited tilt adjustment ranging from 0º to 12º. This offers greater flexibility in positioning the infant as required.
Specifications:
Incubator Dimensions
Incubator with Elevating Base:
- Height:
- Overall height: 54 to 62 inches (136.2 to 157.5 cm)
- Elevating base: 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
- Depth: 71.1 cm (28 in)
- Width: 83.8 cm (33 in)
- Weight: 89 kg (195 lb)
Drawer Packages for Elevating Base or Stationary Pedestal:
- Overall: 28 x 29 x 46 cm (11 x 11.5 x 18.25 in)
- Single deep drawer: 25 x 23 x 42 cm (10 x 9 x 16.5 in)
- Dual drawer: 11 x 23 x 42 cm (4.5 x 9 x 16.5 in)
Incubator with Cabinet:
- Height: 141 cm (55 in)
- Depth: 64.6 cm (25.5 in)
- Width: 88.9 cm (35 in)
- Weight: 84 kg (185 lb)
Incubator Characteristics:
- Casters: 5-inch diameter, 2 locking, 2 non-locking
- Mattress: 34.8 x 65 cm (13.7 x 25.6 in)
- Mattress to Hood: 41 cm (16 in)
- Door Height: 28 cm (11 in)
- Tilt:
- CP 3000: 0°, 3°, and 6°
- CP 4000: Continuous from 0° to 12°
- Port holes: 6
- Tubing ports: 6
Electrical Power Requirements
- 120 Vac 60Hz
- Models: 115 V ±10% 5.7 amps
- Conforms to: IEC 601.1, UL 544, and CSA 22.2 No. 125 requirements
- Nominal power consumption: 450 watts at maximum heater output
- Line voltage compensation: Adjusted for voltage variations
- Leakage currents: Less than 100 microamps on 120V units
- Leakage at patient probe: Less than 50 microamps on 120V unit
Operation Environment
- Operating temperature range: 20° to 30°C (68° to 86°F)
- Storage temperature range: -25° to 60°C (13° to 140°F)
- Operating humidity range: 0 to 90%
System Control Characteristics
- Microprocessor-based control: Self-test functions during power-up and operation
- Patient Control (Servo) Mode: 35° to 37°C (95° to 98.6°F)
- Air Control (Manual) Mode: 20° to 37°C (73.4° to 98.6°F)
- Up to 39°C (102.2°F) with control panel override switch
- Air Velocity: Average <10 cm/sec with inner wall
- Temperature variability: Less than ±0.3°C
- Resolution: ±0.1°C or 0°F
- Probe interchangeability: ±0.1°C/0.2°F
- Average oxygen input concentration range:
- 5 L/min: 25 to 45%
- 10 L/min: 35 to 65%
- 15 L/min: 45 to 70%
- Humidification:
- Standard – 10 to 75% depending on environment and incubator temperature setting
- Servo – 40
